Taping Units, Wrapping, with High Quality, Good Price
|FOB Price:||US $5,000 / Set|
|Min. Order:||1 Set|
|Min. Order||FOB Price|
|1 Set||US $5,000/ Set|
|Payment Terms:||L/C, T/T|
- Model NO.: many types
- Specification: ISO9001,2000
- Trademark: changjiang jinggong
- Origin: Anhui Lu′an
High speed oblique tapping machine is suitable for tapping on the cable with cotton paper or foil aluminum for shielding.
The specific production informations, please read the below:
|Suitable core wire dia.||φ0.06-0.12mm|
|Max.twisted outside dia.||φ6.0mm(max.)|
|Twisted Pitch range||8.5-40mm|
|Pay off bobbin dia.||φ400-500 ABS pay off bobbin shared|
|Take up bobbine dia.||φ400-500 ABS take up bobbin shared|
|Pay off power||3.7KW*3 frequency control|
|Take up power||torque motor 15N.m|
|Pay off tension||5KG Tension control|
|Traverse device||φ30 polish rod wire setting|
All kinds of taping units, with all kinds of specifications.
You can send email to us to get some details about our proctions.
High speed non-metal taping machine
Plane taping machine
Common taping machine(3B and 4B)
Concentric taping machine
1. Technical Specification
1.1 Max. Rotating speed of steel taping head 374.8r/min
1.2 Pad width 10~60mm
1.3 Pad size(out diameter×bore diameter) 800×250mm
1.4 Tap tension 2.5~30 Kg
2. Layout plan
3. Foundation Plan
The machine is used for cable overlapping & taping
5. Structure instruction
5.1. The device adopt semi -tangential type,It including front and back holder,6 steps reversing variable speed gear box,rotor,brake device and safety fence and cover etc.
5.2. The two ends of rotor install a pair of self -aligning bearing to ensure the rotor rotating flexible and smooth.
5.3. The scope of steel pads tension is 2~30kg,it can adjust the screw nut which install on the tension tap, in order to change the tension of spring. When the machine working,the tension stability controlled by tension feedback device,in order to it not affected by the taping diameter size change.
5.4.The machine install a finish-taping & stopping device,when steel(copper) tap closing to pay-off,though the wheel connecting with dancer rocker arm,which has a contactor press to limit switch and make sure the machine stopping. At this time,the braking device receiving this signal,electromagnetic valve will run,it make the compressed air quickly into the small cylinder,promoting the brake device and holding the brake pad,making the rotor quickly stopping rotation,in order to reduce the tapping pitch change. At this time,the dancer rocker arm device maintain stable tension.
5.5. Running tap part design into adjustment type,loosen screw nut and adjust rocker angle,the guiding strand wheel will change the position,stopping device can move on the optical axis,in order to take the position of the wheel and the close coordination, make steel (copper) away smoothly.
That's our connected informations:
Yangtze Precision Machinery & Technology Co.,Ltd.
Changjiang Jinggong Industrial Park, Lu'an Economic
Development Zone, Anhui, China 237161